Hello,

Is anyone using a scanner with a WIA interface ?
can you share some code or point me in the tight direction, on how to 
use it ?

Thanks,
Edgar

Two options:

First is interface to TWAIN (not WIA) by use of "EZTWAIN.DLL"  that was 
around some time ago. Not sure about author if it is still around?
Express++ has it incorporated into util of its own.

Second one would be from "NAPS2" open source project.
Has commandline interface, GUI if needed for configuration, support for 
save to different formats , etc. OCR option was added too some time ago.




Edgar Borger je 15.4.2021 ob 15:57 napisal:
> Hello,
> 
> Is anyone using a scanner with a WIA interface ?
> can you share some code or point me in the tight direction, on how to 
> use it ?
> 
> Thanks,
> Edgar
>

Hi Matej

thank you, but there is no sample/attachments....
where can I find them ?


Em 16/04/2021 03:49, Matej Jurac escreveu:
> Two options:
> 
> First is interface to TWAIN (not WIA) by use of "EZTWAIN.DLL"  that was 
> around some time ago. Not sure about author if it is still around?
> Express++ has it incorporated into util of its own.
> 
> Second one would be from "NAPS2" open source project.
> Has commandline interface, GUI if needed for configuration, support for 
> save to different formats , etc. OCR option was added too some time ago.
> 
> 
> 
> 
> Edgar Borger je 15.4.2021 ob 15:57 napisal:
>> Hello,
>>
>> Is anyone using a scanner with a WIA interface ?
>> can you share some code or point me in the tight direction, on how to 
>> use it ?
>>
>> Thanks,
>> Edgar
>>
>

First one is part of Roger Donnay's "Express++" distribution, so I 
cannot link it into here.

Second one is open source project at https://www.naps2.com/
This is one I currently use due to great options available (command line 
version works really well).


Edgar Borger je 16.4.2021 ob 16:42 napisal:
> Hi Matej
> 
> thank you, but there is no sample/attachments....
> where can I find them ?
> 
> 
> Em 16/04/2021 03:49, Matej Jurac escreveu:
>> Two options:
>>
>> First is interface to TWAIN (not WIA) by use of "EZTWAIN.DLL"  that 
>> was around some time ago. Not sure about author if it is still around?
>> Express++ has it incorporated into util of its own.
>>
>> Second one would be from "NAPS2" open source project.
>> Has commandline interface, GUI if needed for configuration, support 
>> for save to different formats , etc. OCR option was added too some 
>> time ago.
>>
>>
>>
>>
>> Edgar Borger je 15.4.2021 ob 15:57 napisal:
>>> Hello,
>>>
>>> Is anyone using a scanner with a WIA interface ?
>>> can you share some code or point me in the tight direction, on how to 
>>> use it ?
>>>
>>> Thanks,
>>> Edgar
>>>
>>

Thank you Matej, so just to be clear, you use the command line module, 
you do not call the DLL directly, correct?



Em 20/04/2021 06:20, Matej Jurac escreveu:
> First one is part of Roger Donnay's "Express++" distribution, so I 
> cannot link it into here.
> 
> Second one is open source project at https://www.naps2.com/
> This is one I currently use due to great options available (command line 
> version works really well).
> 
> 
> Edgar Borger je 16.4.2021 ob 16:42 napisal:
>> Hi Matej
>>
>> thank you, but there is no sample/attachments....
>> where can I find them ?
>>
>>
>> Em 16/04/2021 03:49, Matej Jurac escreveu:
>>> Two options:
>>>
>>> First is interface to TWAIN (not WIA) by use of "EZTWAIN.DLL"  that 
>>> was around some time ago. Not sure about author if it is still around?
>>> Express++ has it incorporated into util of its own.
>>>
>>> Second one would be from "NAPS2" open source project.
>>> Has commandline interface, GUI if needed for configuration, support 
>>> for save to different formats , etc. OCR option was added too some 
>>> time ago.
>>>
>>>
>>>
>>>
>>> Edgar Borger je 15.4.2021 ob 15:57 napisal:
>>>> Hello,
>>>>
>>>> Is anyone using a scanner with a WIA interface ?
>>>> can you share some code or point me in the tight direction, on how 
>>>> to use it ?
>>>>
>>>> Thanks,
>>>> Edgar
>>>>
>>>
>

Correct, command line utility.

.dll are csharp ones for .net and not useable with xpp



Edgar Borger je 20.4.2021 ob 22:20 napisal:
> Thank you Matej, so just to be clear, you use the command line module, 
> you do not call the DLL directly, correct?
> 
> 
> 
> Em 20/04/2021 06:20, Matej Jurac escreveu:
>> First one is part of Roger Donnay's "Express++" distribution, so I 
>> cannot link it into here.
>>
>> Second one is open source project at https://www.naps2.com/
>> This is one I currently use due to great options available (command 
>> line version works really well).
>>
>>
>> Edgar Borger je 16.4.2021 ob 16:42 napisal:
>>> Hi Matej
>>>
>>> thank you, but there is no sample/attachments....
>>> where can I find them ?
>>>
>>>
>>> Em 16/04/2021 03:49, Matej Jurac escreveu:
>>>> Two options:
>>>>
>>>> First is interface to TWAIN (not WIA) by use of "EZTWAIN.DLL"  that 
>>>> was around some time ago. Not sure about author if it is still around?
>>>> Express++ has it incorporated into util of its own.
>>>>
>>>> Second one would be from "NAPS2" open source project.
>>>> Has commandline interface, GUI if needed for configuration, support 
>>>> for save to different formats , etc. OCR option was added too some 
>>>> time ago.
>>>>
>>>>
>>>>
>>>>
>>>> Edgar Borger je 15.4.2021 ob 15:57 napisal:
>>>>> Hello,
>>>>>
>>>>> Is anyone using a scanner with a WIA interface ?
>>>>> can you share some code or point me in the tight direction, on how 
>>>>> to use it ?
>>>>>
>>>>> Thanks,
>>>>> Edgar
>>>>>
>>>>
>>