| Author | Topic: Suddenly VX does not work |
|---|
 | James Loughner | Suddenly VX does not work
on Mon, 05 Jul 2004 14:51:06 -0400Don't know what I did but now I get
"bridge failure"
then
"runtime error 217 00260235"
Arrrg!!!
Jim |
| Heiko Schmidt [Databear Software] | Re: Suddenly VX does not work
on Mon, 05 Jul 2004 21:21:12 +0200Hi Jim,
Are your environment settings (PATH, LIB, ...) correct?
Heiko Schmidt
Databear Software
"James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
news:J0P20DsYEHA.6512@S15147418...
> Don't know what I did but now I get
>
> "bridge failure"
>
> then
> "runtime error 217 00260235"
>
> Arrrg!!!
>
>
> Jim |
| James Loughner | Re: Suddenly VX does not work
on Mon, 05 Jul 2004 21:58:45 -0400I think so. I'll check.
Jim
Heiko Schmidt [Databear Software] wrote:
> Hi Jim,
>
> Are your environment settings (PATH, LIB, ...) correct?
>
>
> Heiko Schmidt
> Databear Software
>
>
> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
> news:J0P20DsYEHA.6512@S15147418...
>
>>Don't know what I did but now I get
>>
>>"bridge failure"
>>
>>then
>>"runtime error 217 00260235"
>>
>>Arrrg!!!
>>
>>
>>Jim
>
>
> |
| James Loughner | Re: Suddenly VX does not work
on Tue, 06 Jul 2004 17:29:03 -0400Still not working. all the paths seem to be alright.
Jim
James Loughner wrote:
> I think so. I'll check.
>
> Jim
>
> Heiko Schmidt [Databear Software] wrote:
>
>> Hi Jim,
>>
>> Are your environment settings (PATH, LIB, ...) correct?
>>
>>
>> Heiko Schmidt
>> Databear Software
>>
>>
>> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>> news:J0P20DsYEHA.6512@S15147418...
>>
>>> Don't know what I did but now I get
>>>
>>> "bridge failure"
>>>
>>> then
>>> "runtime error 217 00260235"
>>>
>>> Arrrg!!!
>>>
>>>
>>> Jim
>>
>>
>>
>> |
| Heiko Schmidt [Databear Software] | Re: Suddenly VX does not work
on Wed, 07 Jul 2004 09:24:37 +0200Jim,
please check that VX was installed in the same directory you
installed Xbase++ 1.82 in.
If VX still not working, delete the registry entries of VX. You can use
"vx20 -cr" to clear your registry. Now try again.
Does this help?
With best regards
Heiko Schmidt
Databear Software
-----------------------------------------------------
Info: info@databear-software.com
Technical Support: support@databear-software.com
Website: www.databear-software.com
Forum: www.databear-board.com
-----------------------------------------------------
"James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
news:8hzrfA6YEHA.6380@S15147418...
> Still not working. all the paths seem to be alright.
>
> Jim
>
> James Loughner wrote:
>
> > I think so. I'll check.
> >
> > Jim
> >
> > Heiko Schmidt [Databear Software] wrote:
> >
> >> Hi Jim,
> >>
> >> Are your environment settings (PATH, LIB, ...) correct?
> >>
> >>
> >> Heiko Schmidt
> >> Databear Software
> >>
> >>
> >> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
> >> news:J0P20DsYEHA.6512@S15147418...
> >>
> >>> Don't know what I did but now I get
> >>>
> >>> "bridge failure"
> >>>
> >>> then
> >>> "runtime error 217 00260235"
> >>>
> >>> Arrrg!!!
> >>>
> >>>
> >>> Jim
> >>
> >>
> >>
> >> |
| Mike Grace | Re: Suddenly VX does not work
on Wed, 07 Jul 2004 08:57:09 +0100James,
Are you using the 1.9. ADSDBE Beta?
If so, that screws up VX.
You will need to uninstall VX and xbase, reinstall both but don't put
the ADSDBE beta in there.
HTH
Mike
Heiko Schmidt [Databear Software] wrote:
> Jim,
>
> please check that VX was installed in the same directory you
> installed Xbase++ 1.82 in.
>
> If VX still not working, delete the registry entries of VX. You can use
> "vx20 -cr" to clear your registry. Now try again.
>
> Does this help?
>
>
> With best regards
>
> Heiko Schmidt
> Databear Software
>
> -----------------------------------------------------
> Info: info@databear-software.com
> Technical Support: support@databear-software.com
> Website: www.databear-software.com
> Forum: www.databear-board.com
> -----------------------------------------------------
>
>
> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
> news:8hzrfA6YEHA.6380@S15147418...
>
>>Still not working. all the paths seem to be alright.
>>
>>Jim
>>
>>James Loughner wrote:
>>
>>
>>>I think so. I'll check.
>>>
>>>Jim
>>>
>>>Heiko Schmidt [Databear Software] wrote:
>>>
>>>
>>>>Hi Jim,
>>>>
>>>>Are your environment settings (PATH, LIB, ...) correct?
>>>>
>>>>
>>>>Heiko Schmidt
>>>>Databear Software
>>>>
>>>>
>>>>"James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>>>>news:J0P20DsYEHA.6512@S15147418...
>>>>
>>>>
>>>>>Don't know what I did but now I get
>>>>>
>>>>>"bridge failure"
>>>>>
>>>>>then
>>>>>"runtime error 217 00260235"
>>>>>
>>>>>Arrrg!!!
>>>>>
>>>>>
>>>>>Jim
>>>>
>>>>
>>>>
>>>>
>
> |
| James Loughner | Re: Suddenly VX does not work
on Wed, 07 Jul 2004 12:10:36 -0400Nope. not using ADSDBE
Jim
Mike Grace wrote:
> James,
>
> Are you using the 1.9. ADSDBE Beta?
>
> If so, that screws up VX.
>
> You will need to uninstall VX and xbase, reinstall both but don't put
> the ADSDBE beta in there.
>
>
> HTH
>
> Mike
>
> Heiko Schmidt [Databear Software] wrote:
>
>> Jim,
>>
>> please check that VX was installed in the same directory you
>> installed Xbase++ 1.82 in.
>>
>> If VX still not working, delete the registry entries of VX. You can use
>> "vx20 -cr" to clear your registry. Now try again.
>>
>> Does this help?
>>
>>
>> With best regards
>>
>> Heiko Schmidt
>> Databear Software
>>
>> -----------------------------------------------------
>> Info: info@databear-software.com
>> Technical Support: support@databear-software.com
>> Website: www.databear-software.com
>> Forum: www.databear-board.com
>> -----------------------------------------------------
>>
>>
>> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>> news:8hzrfA6YEHA.6380@S15147418...
>>
>>> Still not working. all the paths seem to be alright.
>>>
>>> Jim
>>>
>>> James Loughner wrote:
>>>
>>>
>>>> I think so. I'll check.
>>>>
>>>> Jim
>>>>
>>>> Heiko Schmidt [Databear Software] wrote:
>>>>
>>>>
>>>>> Hi Jim,
>>>>>
>>>>> Are your environment settings (PATH, LIB, ...) correct?
>>>>>
>>>>>
>>>>> Heiko Schmidt
>>>>> Databear Software
>>>>>
>>>>>
>>>>> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>>>>> news:J0P20DsYEHA.6512@S15147418...
>>>>>
>>>>>
>>>>>> Don't know what I did but now I get
>>>>>>
>>>>>> "bridge failure"
>>>>>>
>>>>>> then
>>>>>> "runtime error 217 00260235"
>>>>>>
>>>>>> Arrrg!!!
>>>>>>
>>>>>>
>>>>>> Jim
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>
>> |
| James Loughner | Re: Suddenly VX does not work
on Wed, 07 Jul 2004 12:23:44 -0400Vx was installed and running. But suddenly stopped working with the
bridge errors. tried uninstalling an re installing with no help.
Starting with vx20 -cr seems to lockup. I have given it a good long time
to complete ( do have a rather large registry) but it simply never
returns. Better then 5 minuets now.
Jim
Heiko Schmidt [Databear Software] wrote:
> Jim,
>
> please check that VX was installed in the same directory you
> installed Xbase++ 1.82 in.
>
> If VX still not working, delete the registry entries of VX. You can use
> "vx20 -cr" to clear your registry. Now try again.
>
> Does this help?
>
>
> With best regards
>
> Heiko Schmidt
> Databear Software
>
> -----------------------------------------------------
> Info: info@databear-software.com
> Technical Support: support@databear-software.com
> Website: www.databear-software.com
> Forum: www.databear-board.com
> -----------------------------------------------------
>
>
> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
> news:8hzrfA6YEHA.6380@S15147418...
>
>>Still not working. all the paths seem to be alright.
>>
>>Jim
>>
>>James Loughner wrote:
>>
>>
>>>I think so. I'll check.
>>>
>>>Jim
>>>
>>>Heiko Schmidt [Databear Software] wrote:
>>>
>>>
>>>>Hi Jim,
>>>>
>>>>Are your environment settings (PATH, LIB, ...) correct?
>>>>
>>>>
>>>>Heiko Schmidt
>>>>Databear Software
>>>>
>>>>
>>>>"James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>>>>news:J0P20DsYEHA.6512@S15147418...
>>>>
>>>>
>>>>>Don't know what I did but now I get
>>>>>
>>>>>"bridge failure"
>>>>>
>>>>>then
>>>>>"runtime error 217 00260235"
>>>>>
>>>>>Arrrg!!!
>>>>>
>>>>>
>>>>>Jim
>>>>
>>>>
>>>>
>>>>
>
> |
| politicallyIncorrect | Re: Suddenly VX does not work
on Thu, 08 Jul 2004 06:20:53 -0600vx clearing automated does not work on Xp platforms, you will need to
use RegEdit to remove Vx... this will reset the registery
James Loughner wrote:
>
> Vx was installed and running. But suddenly stopped working with the
> bridge errors. tried uninstalling an re installing with no help.
>
> Starting with vx20 -cr seems to lockup. I have given it a good long time
> to complete ( do have a rather large registry) but it simply never
> returns. Better then 5 minuets now.
>
> Jim
>
> Heiko Schmidt [Databear Software] wrote:
>
>> Jim,
>>
>> please check that VX was installed in the same directory you
>> installed Xbase++ 1.82 in.
>>
>> If VX still not working, delete the registry entries of VX. You can use
>> "vx20 -cr" to clear your registry. Now try again.
>>
>> Does this help?
>>
>>
>> With best regards
>>
>> Heiko Schmidt
>> Databear Software
>>
>> -----------------------------------------------------
>> Info: info@databear-software.com
>> Technical Support: support@databear-software.com
>> Website: www.databear-software.com
>> Forum: www.databear-board.com
>> -----------------------------------------------------
>>
>>
>> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>> news:8hzrfA6YEHA.6380@S15147418...
>>
>>> Still not working. all the paths seem to be alright.
>>>
>>> Jim
>>>
>>> James Loughner wrote:
>>>
>>>
>>>> I think so. I'll check.
>>>>
>>>> Jim
>>>>
>>>> Heiko Schmidt [Databear Software] wrote:
>>>>
>>>>
>>>>> Hi Jim,
>>>>>
>>>>> Are your environment settings (PATH, LIB, ...) correct?
>>>>>
>>>>>
>>>>> Heiko Schmidt
>>>>> Databear Software
>>>>>
>>>>>
>>>>> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>>>>> news:J0P20DsYEHA.6512@S15147418...
>>>>>
>>>>>
>>>>>> Don't know what I did but now I get
>>>>>>
>>>>>> "bridge failure"
>>>>>>
>>>>>> then
>>>>>> "runtime error 217 00260235"
>>>>>>
>>>>>> Arrrg!!!
>>>>>>
>>>>>>
>>>>>> Jim
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>
>> |
| James Loughner | Re: Suddenly VX does not work
on Sat, 10 Jul 2004 14:54:46 -0400Found the problem somehow I had an old copy of XppUi3.dll, probably form
trying to update the OCX stuff. This also caused a problem with the FD.
I had a copy of the DLL 1.82 but I can't find a copy of the lib.
Could someone send me a copy of the XppUi3.LIB dated 3/27/03
BTW whats in XppUi3.dll there is nothing in the documentation about it
and none of my programs seem to use it.
Jim
politicallyIncorrect wrote:
> vx clearing automated does not work on Xp platforms, you will need to
> use RegEdit to remove Vx... this will reset the registery
>
> James Loughner wrote:
>
>>
>> Vx was installed and running. But suddenly stopped working with the
>> bridge errors. tried uninstalling an re installing with no help.
>>
>> Starting with vx20 -cr seems to lockup. I have given it a good long
>> time to complete ( do have a rather large registry) but it simply
>> never returns. Better then 5 minuets now.
>>
>> Jim
>>
>> Heiko Schmidt [Databear Software] wrote:
>>
>>> Jim,
>>>
>>> please check that VX was installed in the same directory you
>>> installed Xbase++ 1.82 in.
>>>
>>> If VX still not working, delete the registry entries of VX. You can use
>>> "vx20 -cr" to clear your registry. Now try again.
>>>
>>> Does this help?
>>>
>>>
>>> With best regards
>>>
>>> Heiko Schmidt
>>> Databear Software
>>>
>>> -----------------------------------------------------
>>> Info: info@databear-software.com
>>> Technical Support: support@databear-software.com
>>> Website: www.databear-software.com
>>> Forum: www.databear-board.com
>>> -----------------------------------------------------
>>>
>>>
>>> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>>> news:8hzrfA6YEHA.6380@S15147418...
>>>
>>>> Still not working. all the paths seem to be alright.
>>>>
>>>> Jim
>>>>
>>>> James Loughner wrote:
>>>>
>>>>
>>>>> I think so. I'll check.
>>>>>
>>>>> Jim
>>>>>
>>>>> Heiko Schmidt [Databear Software] wrote:
>>>>>
>>>>>
>>>>>> Hi Jim,
>>>>>>
>>>>>> Are your environment settings (PATH, LIB, ...) correct?
>>>>>>
>>>>>>
>>>>>> Heiko Schmidt
>>>>>> Databear Software
>>>>>>
>>>>>>
>>>>>> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>>>>>> news:J0P20DsYEHA.6512@S15147418...
>>>>>>
>>>>>>
>>>>>>> Don't know what I did but now I get
>>>>>>>
>>>>>>> "bridge failure"
>>>>>>>
>>>>>>> then
>>>>>>> "runtime error 217 00260235"
>>>>>>>
>>>>>>> Arrrg!!!
>>>>>>>
>>>>>>>
>>>>>>> Jim
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>
>>>
> |
| Joe Carrick | Re: Suddenly VX does not work
on Sat, 10 Jul 2004 12:27:57 -0700James Loughner wrote:
>
> Found the problem somehow I had an old copy of XppUi3.dll, probably form
> trying to update the OCX stuff. This also caused a problem with the FD.
> I had a copy of the DLL 1.82 but I can't find a copy of the lib.
>
> Could someone send me a copy of the XppUi3.LIB dated 3/27/03
>
> BTW whats in XppUi3.dll there is nothing in the documentation about it
> and none of my programs seem to use it.
>
> Jim
>
> politicallyIncorrect wrote:
>
>> vx clearing automated does not work on Xp platforms, you will need to
>> use RegEdit to remove Vx... this will reset the registery
>>
>> James Loughner wrote:
>>
>>>
>>> Vx was installed and running. But suddenly stopped working with the
>>> bridge errors. tried uninstalling an re installing with no help.
>>>
>>> Starting with vx20 -cr seems to lockup. I have given it a good long
>>> time to complete ( do have a rather large registry) but it simply
>>> never returns. Better then 5 minuets now.
>>>
>>> Jim
>>>
>>> Heiko Schmidt [Databear Software] wrote:
>>>
>>>> Jim,
>>>>
>>>> please check that VX was installed in the same directory you
>>>> installed Xbase++ 1.82 in.
>>>>
>>>> If VX still not working, delete the registry entries of VX. You can use
>>>> "vx20 -cr" to clear your registry. Now try again.
>>>>
>>>> Does this help?
>>>>
>>>>
>>>> With best regards
>>>>
>>>> Heiko Schmidt
>>>> Databear Software
>>>>
>>>> -----------------------------------------------------
>>>> Info: info@databear-software.com
>>>> Technical Support: support@databear-software.com
>>>> Website: www.databear-software.com
>>>> Forum: www.databear-board.com
>>>> -----------------------------------------------------
>>>>
>>>>
>>>> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>>>> news:8hzrfA6YEHA.6380@S15147418...
>>>>
>>>>> Still not working. all the paths seem to be alright.
>>>>>
>>>>> Jim
>>>>>
>>>>> James Loughner wrote:
>>>>>
>>>>>
>>>>>> I think so. I'll check.
>>>>>>
>>>>>> Jim
>>>>>>
>>>>>> Heiko Schmidt [Databear Software] wrote:
>>>>>>
>>>>>>
>>>>>>> Hi Jim,
>>>>>>>
>>>>>>> Are your environment settings (PATH, LIB, ...) correct?
>>>>>>>
>>>>>>>
>>>>>>> Heiko Schmidt
>>>>>>> Databear Software
>>>>>>>
>>>>>>>
>>>>>>> "James Loughner" <jwrl@charter.net> schrieb im Newsbeitrag
>>>>>>> news:J0P20DsYEHA.6512@S15147418...
>>>>>>>
>>>>>>>
>>>>>>>> Don't know what I did but now I get
>>>>>>>>
>>>>>>>> "bridge failure"
>>>>>>>>
>>>>>>>> then
>>>>>>>> "runtime error 217 00260235"
>>>>>>>>
>>>>>>>> Arrrg!!!
>>>>>>>>
>>>>>>>>
>>>>>>>> Jim
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>
>>>>
>>
 XppUi3.lib |
| Hannes Ziegler | Re: Suddenly VX does not work
on Tue, 06 Jul 2004 23:05:29 +0200James Loughner wrote:
>
> Don't know what I did but now I get
>
> "bridge failure"
Bridge failure?
"Bridge failure" is a runtime error
VXBridge is still full of bugs
Ask Till
HTH
Hannes |
| James Loughner | Re: Suddenly VX does not work
on Tue, 06 Jul 2004 22:47:09 -0400I thought thats what I was doing.
I have even tried uninstalling and installing again.
I have not used VX much I still like my little IDE. I can develop much
faster just using it. But VX does have a very nice debugger that comes
in handy at times. Its just that now I can't seem to get it to run at all.
Jim
Hannes Ziegler wrote:
> James Loughner wrote:
>
>>Don't know what I did but now I get
>>
>>"bridge failure"
>
>
> Bridge failure?
>
> "Bridge failure" is a runtime error
>
> VXBridge is still full of bugs
>
> Ask Till
>
> HTH
>
> Hannes |
| Steffen F. Pirsig [Alaska Software] | Re: Suddenly VX does not work
on Mon, 12 Jul 2004 19:51:27 +0200James,
sorry for the late reply. However the runtime error 217, ... while
loading the bridge is always a indication that an older Xbase++
Runtime DLL or an old XPPOCX.DLL is somewhere hanging
around.
VX needs 1.82.294 to work properly. You can check this if you
execute XPPLOAD VERSION in the bin-directory where VX20.
EXE and VXIDE20.EXE reside.
HTH
Steffen F. Pirsig
Alaska Software
"James Loughner" <jwrl@charter.net> wrote in message
news:J0P20DsYEHA.6512@S15147418...
> Don't know what I did but now I get
>
> "bridge failure"
>
> then
> "runtime error 217 00260235"
>
> Arrrg!!!
>
>
> Jim |
